01-800-000-GIAT
Carrito de Compras

1240i - Programmable step motor drive


1240i - Programmable step motor drive
ˆ Haga clic para agrandar

Imagenes adicionales

Elige tu modelo:




( Puedes quitarlo después )

Marca: Applied Motion

1240i
Input12-42 VDC 
Output4.2 V
Max Output Current:1.2 A
Programmable:SIQSCL (Host Control)
Command Options: Step & DirectionOscillatorJoystick
Communications:RS232RS485
Step Resolution: Full Half Micro
Anti-Resonance:
Idle Current Reduction:

Features:

  • Programmable for stand alone operation with Applied Motion' s easy to use Si ProgrammerTM Windows software (software and programming cable included)
  • Can be operated in real time from a host PC or PLC using Applied Motion' s Si Command LanguageTM (SCL)
  • Can be networked with all other SiTM products via Applied Motion' s SiNetTM Hub
  • DC bus voltage 12-42 VDC motor supply (including ripple)
  • Software selectable motor current from 0.2 - 1.2 amps/phase
  • Software selectable Step resolutions from 2,000 to 50,800 steps per revolution
  • Software selectable idle current reduction 0%, 25%, 50% or 100%
  • 8 user programmable inputs
  • 3 optically isolated 5-24 VDC outputs
  • Communication via RS232 or optional RS485
  • 48 watts of usable power
  • Screw terminal connector blocks for power, motor and I/O. RJ11 for RS232 port
  • MOSFET, dual H-Bridge, inaudible PWM amplifier
  • 3 state, pulse width modulated current control, switching at 20-30 kHz
  • Optional operator terminal (MMI) either standard or backlit
  • Drives 4, 6 or 8 lead size 11, 14, 17 or 23 step motors

Description:

The 1240i is a programmable step motor driver suited for a wide range of motion control applications. It includes a sophisticated controller integrated with a 48-watt microstepping amplifier.

The 1240i includes Applied Motion' s easy to use Si ProgrammerTM Windows software for the rapid development of stand-alone motion control programs. The 1240i can also be commanded in real time from a host PC or PLC, using the Si Command LanguageTM. For multi-axis applications, up to eight Applied Motion SiTM drives (stepper or Servo) can be networked using a single SiNetTM Hub.

The 1240i includes 8 optically isolated programmable inputs for triggering, branching, position sensing and end of travel detection. 3 optically isolated programmable outputs can send signals to other electronic devices and activate relays.


Recommended Motors
HT11-012         HT11-013
5014-842
HT17-068         HT17-071          HT17-075
HT23-393         HT23-396          HT23-399