ˆ Haga clic para agrandar
|
Marca: Applied Motion
| Input | 12-42 VDC | | | Output | 42 V | | Max Output Current: | 3.5 A | | Programmable: |  SI |  Q | SCL (Host Control) | | Command Options: | Step & Direction | Oscillator | Joystick | | Communications: | RS232 | RS485 | | Step Resolution: | Full | Half | Micro | | Anti-Resonance: | | | Idle Current Reduction: | |
Features: - Programmable for stand alone operation with Applied Motion' s easy to use Si ProgrammerTM Windows software (software and programming cable included)
- Can be operated in real time form a host PC or PLC using Applied Motion' s Si Command LanguageTM (SCL).
- Can be networked with all other SiTM products via Applied Motion' s SiNetTM Hub
- DC bus voltage 12-42 VDC motor supply (including ripple)
- Software selectable from 0.2?3.5 amps/phase motor current
- Software selectable Step resolutions from 2,000 to 50,800 steps per revolution
- Software selectable idle current reduction 0%, 25%, 50% or 100%
- 8 user programmable inputs
- 3 optically isolated 5?24 VDC outputs
- Communication via RS232 or optional encoder/RS485 daughter board
- 140 watts of usable power
- Screw terminal connector blocks for power, motor and I/O. RJ11 for RS232 port
- MOSFET, dual H-Bridge, inaudible PWM amplifier
- 3 state, pulse width modulated current control, switching at 20?30 kHz
- Optional RS485 and encoder input board
- Optional operator terminal (MMI) either standard or backlit
- Drives 4, 6 or 8 lead size 11, 14, 17, 23 or 34 step motors
- CE and TUV compliant
Description: The 3540i is a programming step motor driver suitable for a wide range of motion control applications. It includes a sophisticated controller integrated with a 140 watt micro-stepping amplifier. The 3540i includes Applied Motion' s easy to use Si ProgrammerTM Windows software for the rapid development of stand-alone motion control programs. The 3540i can also be commanded in real time from a host PC or PLC, using the Si Command LanguageTM . For multi-axis applications, up to eight Applied Motion SiTM drives (stepper or Servo) can be networked using a single SiNetTM Hub. The 3540i includes 8 optically isolated programmable inputs for triggering, branching, position sensing and end of travel detection. 3 optically isolated programmable outputs can send signals to other electronic devices and activate relays. Recommended motors HT11-012 HT11-013 5014-842 HT17-068 HT17-071 HT17-075 HT23-394 HT23-397 HT23-400 5034-348
|
