ˆ Haga clic para agrandar
|
Marca: Applied Motion
Specifications
Output Current: 3.5 A
DC Bus Voltage: 40 VDC
AC Input Voltage:110/220VAC single phase Weight
4 lbs Features
Microstepping
2000 to 50800 steps/rev
110/220VAC Input
SWITCH SELECTABLE
Idle Current Reduction
0%,25%,50%, 100%
Eight optically isolated inputs
12 – 24 VDC. Can be configured for sinking (NPN) or sourcing (PNP) signals.
Three optically isolated outputs
30 V max, 100mA maximum
One optically isolated output 5 VDC
Dedicated to fault out Software
Si Programmer
Download, store and execute programs.
SCL Utility
Send commands and execute in real-time. Includes
Mating Connectors, Software & Programming Cable Description: The Si3540 is a programmable step motor drive/indexer packaged in a rugged steel and aluminum enclosure. Integral heat sink, mounting brackets, switch covers and connectors are included with each Si3540. The Si3540 has been matched with twelve recommended NEMA 11, 14, 17 & 23 frame step motors, and comes with all operating software necessary to create a complete step motor-based motion control solution. The Si3540 includes Applied Motion Products' Windows-based Si ProgrammerTM software application for quick set up and ease of use. Si ProgrammerTM is ideal for stand-alone operation. For users with software development expertise, the Si3540 can also be used with Applied Motion's SiTM Command Language (SCL). SCL allows for control of an Si drive, like the Si3540, via serial commands sent from a host device such as a PC or PLC. This permits the user to perform a variety of motion, I/O, and system status tasks via a host serial device. Multiple axis applications can be handled with the SiNetTM Hub Programmer software, which gives you the ability to control up to 8 Si drives, stepper and servo, from just one SiNet Hub 8. Not only can you sequence up to eight motors, but a SiNet Hub 8 also has access to the inputs and outputs of all the drives connected to it, providing your program with up to 64 inputs and 24 outputs. The SiNet Hub 444 connects up to 4 Si drives, and comes with 4 digital inputs and 4 digital outputs of its own.You can also use Applied Motion's MMI-01 to interface the drives with the machine operator. Factory set to operate at 110 VAC input; the Si3540 can be set by the user to operate at 220 VAC input by a simple switch selection. Pluggable screw terminal blocks are provided for the I/O, motor, and AC power input. Mating connectors, programming cable with computer interface connector, as well as all operating software are provided with each Si3540 drive. The Si3540 is both CE and TUV compliant.
| POWER AMPLIFIER SECTION: | | AMPLIFIER TYPE | MOSFET, dual H-Bridge | | CURRENT CONTROL | 3 state, pulse width modulated, switching at 20 kHz | | OUTPUT CURRENT | 0.2-3.5 amps/phase, software selectable. | | POWER SUPPLY | Linear, toroidal transformer based for high reliability and low noise. 100-120 or 200-240 VAC input, switch selectable. 50/60 Hz | | DC BUS VOLTAGE | DC voltage at nominal line voltage: 35 VDC full load, 40 VDC no load | | AC INPUT VOLTAGE | 110 or 220 VAC (switch selectable), 50/60 Hz | | MAXIMUM OUTPUT POWER | 122 Watts | | IDLE CURRENT REDUCTION | Automatically reduce current to 0%, 25%, 50%, or 100% of running current. Software selectable. | | MOTOR RESOLUTION | 13 resolutions. Steps per revolution with 1.8° motor: 2000, 5000, 10000, 12800, 18000, 20000, 21600, 25000, 25400, 25600, 36000, 50000, 50800. Software selectable. |
| CONTROLLER SECTION: | | SERIAL COMMUNICATION | RS-232 programming port. | | MOTION UPDATE | 12800 Hz. | | INPUTS | 8 user programmable digital inputs. 5-24 VDC, optically isolated. 2200 ohms internal resistance. Can be used for triggering, sensing, homing, branching, jogging or limits. | | OUTPUTS | 3 general purpose digital outputs. 12-24 VDC, optically isolated. 100 mA max. Open collector and open emitter. Can be used for interfacing to other equipment. | | PARAMETER RANGES | Distance: 1 to 16,000,000 steps. Speed: .025 to 50 revolutions per second (in any microstep resolution). Acceleration: 1 to 3,000 rev/sec/sec. Deceleration: 1 to 3,000 rev/sec/sec (set independently from acceleration). Time Delays: 0.01 to 300 seconds. Output Pulse Widths: 2 to 500 milliseconds. Iterations per repeat loop: 1 to 65,535. | | OPTIONAL OPERATOR INTERFACE (MMI-01) | NEMA 4/12 rated (splash proof & dust proof). 4 x 20 character liquid crystal display (LCD). 20 key membrane keypad. Overall size: 4.9 x 4.9 x 1.42 inches. Backlit version available (MMI-02). |
| SYSTEM SPECIFICATIONS: | | OVERALL SIZE | 2.25" x 7.8" x 5.40" | | CHASSIS MATERIAL | Aluminum, black anodized with integral heat sink. | | WEIGHT | 4 lbs. | | AMBIENT TEMPERATURE | 0° to 50°C (32° to 122°F) | | HUMIDITY | Maximum of 90% non-condensing. | | CONNECTORS | Pluggable screw terminal connectors for AC input power, motor, and I/O signals. | | MOTORS | Can drive 4, 6 or 8 lead motors, NEMA sizes 11, 14, 17 & 23. | | CASE | Heavy gauge steel with black paint and white epoxy silk screen. | | AGENCY APPROVAL | CE & TUV. |
| Recommended Motors - NEMA 11, 14, and 17 |
| FEATURES | NEMA 11 | NEMA 11 | NEMA 14 | NEMA 17 | NEMA 17 | NEMA 17 | | Motor P/N | HT11-012 | HT11-013 | 5014-842 | HT17-068 | HT17-071 | HT17-075 | | Motor Current* (amps) | 1.00 | 1.00 | 1.00 | 1.34 | 1.70 | 1.70 | | Resistance* (Ohms) | 1.40 | 2.0 | 4.30 | 2.10 | 1.70 | 1.70 | | Holding Torque* (oz-in) | 7.4 | 15.3 | 26 | 31.4 | 51 | 62.6 | | Rotor Inertia (oz-in2) | 0.044 | 0.098 | 0.109 | 0.19 | 0.29 | 0.37 | | Thrust Load (lbs) | 3.0 | 3.0 | 3.0 | 3.0 | 3.0 | 3.0 | | Radial Load (lbs) | 5.0 | 5.0 | 5.0 | 5.0 | 5.0 | 5.0 | | Radial Play (inch/lbs) | .001 max
@ 1 lb | .001 max
@ 1 lb | .0004 max
@ 1 lb | .0008 max
@ 1 lb | .0008 max
@ 1 lb | .0008 max
@ 1 lb | | End Play (inch/lbs) | .003 max
@ 2 lbs | .003 max
@ 2 lbs | .0004 max
@ 2 lbs | .003 max
@ 2.2 lbs | .003 max
@ 2.2 lbs | .003 max
@ 2.2 lbs | | Weight (lbs) | 0.26 | 0.39 | 0.47 | 0.44 | 0.57 | 0.73 | | Torque Curves | HT11-012 | HT11-013 | 5014-842 | HT17-068 | HT17-071 | HT17-075 | | Torque Curves |  | | | | | | Outline Drawings | 
|
|
|
|
| -->
*Current, resistance, and holding torque ratings for 8 lead motors are for bipolar parallel connection.
| Recommended Motors - NEMA 23 |
| Motor P/N | 5023-122 | 5023-123 | 5023-124 | HT23-394 | HT23-397 | HT23-400 | | Motor Current* (amps) | 2.00 | 2.50 | 3.50 | 2.83 | 2.83 | 2.83 | | Resistance* (Ohms) | 1.24 | 1.18 | 0.82 | 0.70 | 0.90 | 1.10 | | Holding Torque* (oz-in) | 98 | 158 | 225 | 77 | 177 | 264 | | Rotor Inertia (oz-in2) | 0.55 | 1.14 | 1.72 | 0.66 | 1.64 | 2.62 | | Thrust Load (lbs) | 25 | 25 | 25 | 25 | 25 | 25 | | Radial Load (lbs) | 15 | 15 | 15 | 15 | 15 | 15 | | Radial Play (inch/lbs) | .001 max
@ 1 lb | .001 max
@ 1 lb | .001 max
@ 1 lb | .001 max
@ 1 lb | .001 max
@ 1 lb | .001 max
@ 1 lb | | End Play (inch/lbs) | .001 max
@ 9 lbs | .001 max
@ 9 lbs | .001 max
@ 9 lbs | .003 max
@ 2.2 lbs | .003 max
@ 2.2 lbs | .003 max
@ 2.2 lbs | | Weight (lbs) | 1.17 | 2.00 | 2.80 | 1.00 | 1.54 | 2.20 | | Torque Curves | 5023-122 | 5023-123 | 5023-124 | HT23-394 | HT23-397 | HT23-400 | | Torque Curves | | | | | | | Outline Drawings |
|
|
|
|
|
*Current, resistance, and holding torque ratings for 8 lead motors are for bipolar parallel connection.
|
